smart service

Jumat, 02 Desember 2011

Cara Manual Reset Printer Canon MX328

Lebih dari 2 pekan menelusuri resetter Printer Conon MX328, trus mencoba dengan segala upaya, akhirnya setelah berulang kali mencoba tanpa putus asa berjuang mempraktekan reset manual dari berbagai sumber....., Printer Canon MX328 bisa normal kembali.

Tipe Printer Conon Mx ini memang rada sulit untuk di reset ulang !

Langkah-langkah mereset Conon MX328 :

1. Tekan tombol Stop, tahan jangan dilepas sekitar 3-5 detik

2. Lalu tekan tombol On, tahan sebentar, lepaskan tombol stop

3. Tekan 2x tombol Stop, lepaskan tombol On, tunggu sampai ada tulisan "save mode"

4. Selanjutnya tekan lagi tombol Stop 4x, selang waktu penekanan sekitar 3-5 detik pada layar akan akan ada tulisan "SAVE MODE IDLE" yang menunjukan printer dalam keadaan 'idle" /tandar pabrik.

(jika tidak muncul tulisan "SAVE MODE IDLE", coba tekan tombol black/color dan stop berbarengan sekitar 3-5 detik, atau lapaskan salah satu catrid / buka penutup sensornya)

5. Tekan tombol On 2x, printer akan segera mati

7. Tunggu 1-2 menit, hidupkan kembali printer

Selamat mencoba !

Mau mencoba Berbisnis hari ini, klik saja yang di bawah ini :
Peluang Kerja Part Time - Kantor Kedua
Peluang Kerja Belajar sambil Berbisnis
Peluang Kerja di Rumah untuk Ibu Rumah Tangga
Rahasia Search Engine
Cara Buat Newsletter
Cara Membuat Website

Cold Reset Laserjet 2420

To perform a cold reset
1. Turn the printer off.
2. Hold down the SELECT ( ) button, and then turn the printer on. Continue holding down
the SELECT ( ) button until all three printer control-panel lights flash once and then
remain on. This might take up to 10 seconds.
3. After the message SELECT LANGUAGE appears on the display, press the
UP ARROW ( ) button or the DOWN ARROW ( ) button until COLD RESET is highlighted.
4. Press the SELECT ( ) button. The printer performs a cold reset and then continues its
power-on sequence.
5. Check all I/O settings and reset any customer-set printer configuration values.

Reset ini dilakukan untuk mengembalikan semau setting ke posisi awal seperti printer baru.
Sebelum melakukan reset ini, Print dulu configuration page yang terakhir. Agar bisa mengembalikan setting yang penting, seperti I/O dll

NVRAM Initialize Laserjet 2420

To initialize NVRAM
1. Remove any installed accessories (for example, a stapler/stacker).
2. Turn the printer off.
3. Hold down the DOWN ARROW ( ) button, and then turn the printer on. Continue holding
down the DOWN ARROW ( ) button until all three printer control-panel lights flash once and
then remain on. This might take up to 10 seconds.
4. Press the UP ARROW ( ) button.
5. Press the PAUSE/RESUME button. The display should show SKIP DISK LOAD.
6. Press the UP ARROW ( ) button until NVRAM INIT is highlighted.
7. Press the SELECT ( ) button. The printer initializes NVRAM and then continues its poweron
sequence.

Service Menu Laserjet Color 3000-3600-3800

Di Laserjet Color 3000-3600-3800, setiap kita melakukan penggantian Transfer kit atau Fuser kit, sebaiknya kita mengecek apakah counternya udah otomatis terreset atau belum. Nah, cara mengeceknya dapat dilakukan dengan masuk ke SERVICE MENU.
Penjelasan dan Caranya :

Service menu
Using the Service menu
The Service menu is PIN protected for added security. Only authorized service technicians have
access to the Service menu. When you select SERVICE from the list of menus, you are prompted to
type your 8-digit PIN number. The following are the appropriate PIN numbers:
HP Color LaserJet 3000 Series printers: 11300005
HP Color LaserJet 3600 Series printers: 11360005
HP Color LaserJet 3800 Series printers: 11380005
1. Press Menu to open the MENUS.
2. Press to highlight SERVICE, and then press .
3. Press or until the first digit of the PIN appears.
4. Press to save the digit. The control-panel display replaces the digit with an asterisk.
Press at any time to move to the previous digit.
5. Repeat steps 3 and 4 until all eight digits are typed.

Clear event log
Use this item to clear the printer internal event log.

Total page count
The page count that is stored in NVRAM and printed on the configuration page represents the
number of pages that the formatter has formatted (not including engine-test prints). If you install a new formatter when repairing a printer, use this menu item to reset the page count to the previous value. In this way, the page count reflects the number of pages that the engine has printed rather than restarting the count for the new formatter. The page count is in two categories: total mono pages and total color pages.

Transfer kit count
Use this item to reset the transfer unit count if the value is lost, such as when you replace the
formatter. This value is initially set to zero at the factory. Type a value up to 120,000. This value is automatically reset to zero when a customer installs a new transfer kit and sets NEW TRANSFER KIT to YES in the RESETS menu.

Fuser kit count
Use this item to reset the fuser count if the value is lost, such as when you replace the formatter.
This value is initially set to zero at the factory. Type a value up to 150,000. This value is
automatically reset to zero when a customer installs a new transfer kit and sets NEW FUSER KIT to YES in the RESETS menu.

Serial number
If you replace the formatter, use this item to reset the serial number of the printer.

Try this to reset the error. Coba ini untuk me-reset kesalahan.

Try this to reset the error. Coba ini untuk me-reset kesalahan.

1) Close the print head cover, and turn off the printer. 1) Tutup penutup kepala cetak, dan mematikan printer. While pressing the Resume/Cancel button, press the Power button. Sambil menekan tombol Resume / Cancel, tekan tombol Daya. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.) (Jangan lepaskan tombol Lampu LED hijau untuk menunjukkan bahwa suatu fungsi dipilih..)

2) While holding the Power button, release the Resume/Cancel button. 2) Sambil memegang tombol Power, lepaskan Resume / tombol Batal. (Do not release the Power button.) (Jangan lepaskan tombol Power.)

3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. 3) Sambil memegang tombol Power, tekan Resume / Cancel tombol tiga kali, kemudian lepaskan Power dan Resume / Cancel. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green. (Setiap kali tombol Resume / Cancel ditekan, lampu LED bergantian dalam oranye atau hijau baik, dimulai dengan oranye.) Selama inisialisasi, LED berkedip hijau.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. 4) Jika lampu LED berhenti berkedip dan lampu hijau, tekan Resume / Cancel button 4 kali. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) (Setiap kali tombol Resume / Cancel ditekan, lampu LED bergantian dalam oranye atau hijau baik, dimulai dengan oranye.)

5) Press the Power button. 5) Tekan tombol Power. The LED lights in green, and the LED lampu hijau, dan
selected function is performed. fungsi yang dipilih akan dilakukan. (When the operation completes, the printer returns to the menu selection mode automatically.) (Ketika operasi selesai, printer kembali ke mode pilihan menu secara otomatis.)

6) Power off then back on and test. 6) Matikan kemudian kembali dan tes.

Cheers Tepuk tangan

How to Reset Maintenance Counter

Laserjet 4000/4050/4100
Reset at: (200,000 pages)

1. Shut printer off. (Use the SHUT OFF switch)

2. Hold down the Left Side of the ITEM and VALUE Buttons while powering the Printer back on.

3. Continue to hold the Buttons until the Printer says “RESET MAINTENANCE COUNTER” then release the Buttons

Laserjet 5000/5100
Reset at: (150,000 pages)

1. Shut the Printer off. (Use the shut off switch)

2. Hold down the Left Side of the ITEM and VALUE Buttons while powering the Printer back on.

3. Continue to hold Buttons until the Printer says “RESET MAINTENANCE COUNTER”, Then release the Buttons.

Laserjet 8000/8100/8150
Reset at: (350,000 pages)

1. To access the Service Mode, power the Printer down/off and hold down the SELECT & JOB CANCEL Buttons.

2. Power the Printer back on while holding these two (2) Buttons.

3. Hold these Buttons for at least 4 seconds then release.

4. Now press the MENU & SELECT Buttons.

5. You should see “SERVICE MODE” in the display.

6. The Printer will cycle, This is normal.

7. Now press the MENU Button, Then the SERVICE MENU will be displayed on your printer.

8. Now press the ITEM Button until “MAINTCOUNT” is on the display.

9. Now use the + or – Buttons to change the numbers to 0’s.

10. Now press the SELECT Button.

11. Now an Asterisk (*) will appear and you are finished.

12. To exit the Service Mode press the GO Button.

Laserjet 4200/4300
Reset at: (200,000 pages)

1. Use the following Pin Codes:
For LaserJet 4200 (11420002)
For LaserJet 4300 (11430002)

2. Press the SELECT Button to open the Menus.

3. Now use the UP Arrow or DOWN Arrow Buttons to scroll to SERVICE.

4. Once at SERVICE, Press the SELECT Button.

5. Now press the UP or DOWN Arrow Buttons until the first digit of the Pin Code appears.

6. Now press the SELECT Button to save that digit.

7. Repeat this selection procedure until the entire eight (8) digit Pin Code is saved.

8. The Service Sub Menu will appear on the display of the Printer.

9. Now use the UP and DOWN Arrows to scroll to the Maintenance Item on the Service Sub Menu and press the SELECT Button.

10. Now you can set the number of pages since the last Maintenance Kit was installed.

11. The printer automatically exits the Service Menu after about one (1) minute if no Buttons are pressed. You can also hit the PAUSE/RESUME Button to exit.

Resetter Epson L100 dan Cara Penggunaannya

Resetter Epson L100 dan Cara Penggunaannya :

1. Nyalakan Espon L100 dan pastikan Espon L100 sudah connect dengan komputer dan terinstall drivernya.
2. Kemudian jalankan Resetter Epson L100, dengan dobel klik file "AdjProg cracked.exe"
3. Klik "accept" >> "Particular Adjusment Mode" >> Pilih "Waste ink pad Counter reset" >> klik "Check" >> centang "main pad counter, FL box counter, Ink tube Counter", kemudian klik "Initialization" >> "Finish".

4. Langkah selanjutnya matikan Epson L100, kemudian lepaskan kabel powernya.
5. Langkah terakhir pasang kembali kabel power printer dan nyalakan, tunggu beberapa saat sampai Epson L100 dan Epson L100 akan kembali normal.

OK, demikian tadi cara penggunaan resetter Epson L100, Untuk Link download resetter Epson L100 hanya via ziddu.

Semoga berhasil.