smart service: Service Menu Laserjet Color 3000-3600-3800

Jumat, 02 Desember 2011

Service Menu Laserjet Color 3000-3600-3800

Di Laserjet Color 3000-3600-3800, setiap kita melakukan penggantian Transfer kit atau Fuser kit, sebaiknya kita mengecek apakah counternya udah otomatis terreset atau belum. Nah, cara mengeceknya dapat dilakukan dengan masuk ke SERVICE MENU.
Penjelasan dan Caranya :

Service menu
Using the Service menu
The Service menu is PIN protected for added security. Only authorized service technicians have
access to the Service menu. When you select SERVICE from the list of menus, you are prompted to
type your 8-digit PIN number. The following are the appropriate PIN numbers:
HP Color LaserJet 3000 Series printers: 11300005
HP Color LaserJet 3600 Series printers: 11360005
HP Color LaserJet 3800 Series printers: 11380005
1. Press Menu to open the MENUS.
2. Press to highlight SERVICE, and then press .
3. Press or until the first digit of the PIN appears.
4. Press to save the digit. The control-panel display replaces the digit with an asterisk.
Press at any time to move to the previous digit.
5. Repeat steps 3 and 4 until all eight digits are typed.

Clear event log
Use this item to clear the printer internal event log.

Total page count
The page count that is stored in NVRAM and printed on the configuration page represents the
number of pages that the formatter has formatted (not including engine-test prints). If you install a new formatter when repairing a printer, use this menu item to reset the page count to the previous value. In this way, the page count reflects the number of pages that the engine has printed rather than restarting the count for the new formatter. The page count is in two categories: total mono pages and total color pages.

Transfer kit count
Use this item to reset the transfer unit count if the value is lost, such as when you replace the
formatter. This value is initially set to zero at the factory. Type a value up to 120,000. This value is automatically reset to zero when a customer installs a new transfer kit and sets NEW TRANSFER KIT to YES in the RESETS menu.

Fuser kit count
Use this item to reset the fuser count if the value is lost, such as when you replace the formatter.
This value is initially set to zero at the factory. Type a value up to 150,000. This value is
automatically reset to zero when a customer installs a new transfer kit and sets NEW FUSER KIT to YES in the RESETS menu.

Serial number
If you replace the formatter, use this item to reset the serial number of the printer.

Mau mencoba Berbisnis hari ini, klik saja yang di bawah ini :
Peluang Kerja Part Time - Kantor Kedua
Peluang Kerja Belajar sambil Berbisnis
Peluang Kerja di Rumah untuk Ibu Rumah Tangga
Rahasia Search Engine
Cara Buat Newsletter
Cara Membuat Website

Try this to reset the error. Coba ini untuk me-reset kesalahan.

Try this to reset the error. Coba ini untuk me-reset kesalahan.

1) Close the print head cover, and turn off the printer. 1) Tutup penutup kepala cetak, dan mematikan printer. While pressing the Resume/Cancel button, press the Power button. Sambil menekan tombol Resume / Cancel, tekan tombol Daya. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.) (Jangan lepaskan tombol Lampu LED hijau untuk menunjukkan bahwa suatu fungsi dipilih..)

2) While holding the Power button, release the Resume/Cancel button. 2) Sambil memegang tombol Power, lepaskan Resume / tombol Batal. (Do not release the Power button.) (Jangan lepaskan tombol Power.)

3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. 3) Sambil memegang tombol Power, tekan Resume / Cancel tombol tiga kali, kemudian lepaskan Power dan Resume / Cancel. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green. (Setiap kali tombol Resume / Cancel ditekan, lampu LED bergantian dalam oranye atau hijau baik, dimulai dengan oranye.) Selama inisialisasi, LED berkedip hijau.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. 4) Jika lampu LED berhenti berkedip dan lampu hijau, tekan Resume / Cancel button 4 kali. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) (Setiap kali tombol Resume / Cancel ditekan, lampu LED bergantian dalam oranye atau hijau baik, dimulai dengan oranye.)

5) Press the Power button. 5) Tekan tombol Power. The LED lights in green, and the LED lampu hijau, dan
selected function is performed. fungsi yang dipilih akan dilakukan. (When the operation completes, the printer returns to the menu selection mode automatically.) (Ketika operasi selesai, printer kembali ke mode pilihan menu secara otomatis.)

6) Power off then back on and test. 6) Matikan kemudian kembali dan tes.

Cheers Tepuk tangan