Laserjet
4000/4050/4100
Reset at: (200,000 pages)
1. Shut printer off. (Use the SHUT OFF switch)
2. Hold down the Left Side of the ITEM and VALUE Buttons while powering the Printer back on.
3. Continue to hold the Buttons until the Printer says “RESET MAINTENANCE COUNTER” then release the Buttons
Laserjet 5000/5100
Reset at: (150,000 pages)
1. Shut the Printer off. (Use the shut off switch)
2. Hold down the Left Side of the ITEM and VALUE Buttons while powering the Printer back on.
3. Continue to hold Buttons until the Printer says “RESET MAINTENANCE COUNTER”, Then release the Buttons.
Laserjet 8000/8100/8150
Reset at: (350,000 pages)
1. To access the Service Mode, power the Printer down/off and hold down the SELECT & JOB CANCEL Buttons.
2. Power the Printer back on while holding these two (2) Buttons.
3. Hold these Buttons for at least 4 seconds then release.
4. Now press the MENU & SELECT Buttons.
5. You should see “SERVICE MODE” in the display.
6. The Printer will cycle, This is normal.
7. Now press the MENU Button, Then the SERVICE MENU will be displayed on your printer.
8. Now press the ITEM Button until “MAINTCOUNT” is on the display.
9. Now use the + or – Buttons to change the numbers to 0’s.
10. Now press the SELECT Button.
11. Now an Asterisk (*) will appear and you are finished.
12. To exit the Service Mode press the GO Button.
Laserjet 4200/4300
Reset at: (200,000 pages)
Reset at: (200,000 pages)
1. Shut printer off. (Use the SHUT OFF switch)
2. Hold down the Left Side of the ITEM and VALUE Buttons while powering the Printer back on.
3. Continue to hold the Buttons until the Printer says “RESET MAINTENANCE COUNTER” then release the Buttons
Laserjet 5000/5100
Reset at: (150,000 pages)
1. Shut the Printer off. (Use the shut off switch)
2. Hold down the Left Side of the ITEM and VALUE Buttons while powering the Printer back on.
3. Continue to hold Buttons until the Printer says “RESET MAINTENANCE COUNTER”, Then release the Buttons.
Laserjet 8000/8100/8150
Reset at: (350,000 pages)
1. To access the Service Mode, power the Printer down/off and hold down the SELECT & JOB CANCEL Buttons.
2. Power the Printer back on while holding these two (2) Buttons.
3. Hold these Buttons for at least 4 seconds then release.
4. Now press the MENU & SELECT Buttons.
5. You should see “SERVICE MODE” in the display.
6. The Printer will cycle, This is normal.
7. Now press the MENU Button, Then the SERVICE MENU will be displayed on your printer.
8. Now press the ITEM Button until “MAINTCOUNT” is on the display.
9. Now use the + or – Buttons to change the numbers to 0’s.
10. Now press the SELECT Button.
11. Now an Asterisk (*) will appear and you are finished.
12. To exit the Service Mode press the GO Button.
Laserjet 4200/4300
Reset at: (200,000 pages)
1. Use the following Pin
Codes:
For LaserJet 4200 (11420002)
For LaserJet 4300 (11430002)
2. Press the SELECT Button to open the Menus.
3. Now use the UP Arrow or DOWN Arrow Buttons to scroll to SERVICE.
4. Once at SERVICE, Press the SELECT Button.
5. Now press the UP or DOWN Arrow Buttons until the first digit of the Pin Code appears.
6. Now press the SELECT Button to save that digit.
7. Repeat this selection procedure until the entire eight (8) digit Pin Code is saved.
8. The Service Sub Menu will appear on the display of the Printer.
9. Now use the UP and DOWN Arrows to scroll to the Maintenance Item on the Service Sub Menu and press the SELECT Button.
10. Now you can set the number of pages since the last Maintenance Kit was installed.
11. The printer automatically exits the Service Menu after about one (1) minute if no Buttons are pressed. You can also hit the PAUSE/RESUME Button to exit.
Mau mencoba Berbisnis hari ini, klik saja yang di bawah ini :
Peluang Kerja Part Time - Kantor Kedua
Peluang Kerja Belajar sambil Berbisnis
Peluang Kerja di Rumah untuk Ibu Rumah Tangga
Rahasia Search Engine
Cara Buat Newsletter
Cara Membuat Website
For LaserJet 4200 (11420002)
For LaserJet 4300 (11430002)
2. Press the SELECT Button to open the Menus.
3. Now use the UP Arrow or DOWN Arrow Buttons to scroll to SERVICE.
4. Once at SERVICE, Press the SELECT Button.
5. Now press the UP or DOWN Arrow Buttons until the first digit of the Pin Code appears.
6. Now press the SELECT Button to save that digit.
7. Repeat this selection procedure until the entire eight (8) digit Pin Code is saved.
8. The Service Sub Menu will appear on the display of the Printer.
9. Now use the UP and DOWN Arrows to scroll to the Maintenance Item on the Service Sub Menu and press the SELECT Button.
10. Now you can set the number of pages since the last Maintenance Kit was installed.
11. The printer automatically exits the Service Menu after about one (1) minute if no Buttons are pressed. You can also hit the PAUSE/RESUME Button to exit.
Mau mencoba Berbisnis hari ini, klik saja yang di bawah ini :
Peluang Kerja Part Time - Kantor Kedua
Peluang Kerja Belajar sambil Berbisnis
Peluang Kerja di Rumah untuk Ibu Rumah Tangga
Rahasia Search Engine
Cara Buat Newsletter
Cara Membuat Website
Tidak ada komentar:
Posting Komentar